– Entering the router’s Wi-Fi settings


The IP address, is used to access the configuration of a large number of routers, such as the modem/router companies Movistar, Telmex, Intercable and 2wire, it is also very common to access some modem or router Brand Cisco 3560, Thomson and Infinitum. So in this article, we will explain how to access each router brand.

Note: Sometimes for configuration and testing purposes, -t is used. This command is very common in cisco phone systems.

Access the Wi-Fi configuration of the Infinitum Routers

If your router is Infinitum, to access is, you will be asked for a username and a password, in the username you type TELMEX, in capital letters, in the password you have to put a code that is behind the modem that says “WEP KEY“.

Access the Wi-Fi settings of the Thomson TG789 V2 Technicolor Router

To enter these modems just like the other you have to access the IP mentioned at the beginning of this article, it is normal that it does not ask for username and password, in case it asks for such information, you put user admin and key 1234.

Enter the Wi-Fi configuration of the Billion company router

You enter the same IP address from the browser by typing it in the address bar, then you will see a box which will ask for a username and a password, in the username enter admin and the password admin.

Enter the configuration page of the 2Wire company’s router

To access these routers alike you have to access the address, a window will appear asking for a username and a password, in the username you put admin and in the same admin password. If that information does not allow you to enter you have to set the wireless password.

If your router is from the company Netopia

To access these router sometimes is by and sometimes by, try both ways, you will be asked for a username and a password, in the username put admin and the password also put admin, if it does not enter with those credentials try with password 1234 and then press ENTER to access

It is important to know that some of the routers update the firmware and some wireless configuration information may change.

Note: If you have any doubt leave it in the comments, I will try to help you in the best way possible.