In this article we explain how to change the WiFi password on a ZyXEL VMG1312-B10B modem-router. Just follow the steps below and you can easily change your wireless network name and password.
You need to first be connected to the ZyXEL VMG1312-B10B modem with a computer via a network cable. Then open the browser and in the address bar of the same enter your default gateway. In most cases, it is 192.168.1.1 or 10.0.0.1 – When you type the default gateway, press ENTER.
Note: The address you must enter corresponds to your default gateway. If you can not enter either of the two addresses I just gave you can read: Know the IP of my computer and the default gateway.
If you see a page asking for a username and a password, you must enter the SN (Serial number of the modem) as the admin user and password. If you still can not enter with this data you can try the MAC ADDRESS, if after that you still can not enter I recommend contacting your Internet service provider, since they sometimes customise the password and possibly that is why You can enter
Change WiFi password on router ZyXEL VMG1312-B10B
Already when you are inside the configuration of the modem. In the menu on the left side click “INITIAL SETUP” and then click “Wi-Fi Settings“.
There you will see the part where you can change the name and the WiFi network and password.
The first option as its name says is to put or change the name of the wireless network. Then where it says “Coding method” is the type of security of the wireless network. You can choose WPA2-AES.
Then below is where the password goes. If you chose WPA2-AES as your security type, you must enter a password with 8 to 63 characters. It can contain numbers and letters. When you make the desired changes click the button below that says “SAVE CHANGES“.
Any questions you have regarding the ZyXEL VMG1312-B10B modem leave a comment.