When you want to listen to your favorite music in a more intimate space, without disturbing family or neighbors despite putting it at high volume, the HiFi headphones are the most preferable, because they supply their own stage on which to enjoy your audiophile sessions.
The problem arises when choosing our ideal model. In many stores, we find headphones that are defined as “high fidelity” even if they do not, with some specifications on paper painted great but then do not measure up. What have I to choose my next fix for HiFi headset?
Shapes, materials and design
There headphones for all tastes, with very varied designs and structures. For example, according to the way their flag can be of earphones or button type, which are placed in our ears, they are very small, cheap and come standard with many portable players and mobile phones. They are great if you want something light and comfortable, but not if you intend to get a HiFi experience.
We also have in-ear type, similar to earphones but with a design that allows introducing the headset into the ear canal. Isolated from the outside noise, but you have to know good place, give a pad size or lose your bass part with ease.
The third major group is the headphones supra-aural type, format and generally headset holding onto our ears. Usually comfortable, relatively light and good sound quality, but do not provide as good isolation ability as the latter group, circumaural headphones.
Larger, they are able to collect all the pinna inside and have transducers (drivers) larger, allowing them to reach a frequency range much richer reproduction with high power levels without distorting. If you want a true HiFi experience this should be your preferred design.
All right, I’ve chosen a circumaural model, but now I see that there are two major subgroups: with open pavilion (are those having microperforations in the halls) and closed pavilion. What differences are there?, Which is better?
With an open handset you will get a clean, clear, crisp sound at mid-high frequencies and a more controlled bass
In a Type closed the transducer is within a sealed enclosure, while one is open communicates with the outside through a series of small holes that leak sound waves.
This allows the diaphragm to move more freely minimizing resonances within the enclosure and obtaining a clean, clear, crisp sound more controlled but shallower than at mid-high frequencies and a serious in closed models.
Which do I prefer? The main problem is that open headphones through holes will sound out a little and will also fall outside noise. That is, the ability to isolate the environment is reduced and if anyone else in the room you can clearly hear what you are hearing. Therefore, if you go to where you usually use your own, without background noise, choose an open model. If instead you’ll be with other people, with TV background, annoying neighbors, etc., then you need one closed.
To end this block, to comment on the materials of construction and the quality of the finish. In the market, there are headphones headsets and pavilions made of fine cloth, coarse, natural skin, with and without artificial padding, metal, plastic, etc. In general choose one or the other will not affect the quality of hearing, although itself in the quality of the user experience, because if we will use long followed should choose a well-padded model, comfortable, lightweight, pleasant to touch.
Once we know about the type of headset we want it is the turn to check the long list of technical specifications that manufacturers give us. What look? To get started in the impedance, measured in ohms (ohm), which is responsible for directing the resistance to electrical current.
If it is too high we could be starved of power, needing a more powerful to achieve the desired SPL amplifier. Typically, a model of between 16 and 60 ohm can attack with any amplifier that we have at home without problems.
The next important point is the sensitivity (given in dB). It indicates how easy it will be to excite the transducer and gives us an idea of what maximum powers can hear. Every time we went up 3 dB sensitivity means we’ll need half the power amplifier for the same SPL. Thus, a headset with a sensitivity of 100 dB half power need one of 97 dB to provide the same volume (assuming they have the same impedance).
We must also look at the range of frequencies covering the handset. Ideally, covering the entire audible range for an average human (20 Hz to 20 KHz), which in practice very few models to achieve high power without distortion.
You also have to check the size and number of transducers, which are responsible for transforming the electrical signal into sound. The larger the better the reproduction of low frequencies.Also, if they have a driver for severe acute and one for the result will be a clean and precise sound.
Model wired or wireless? In the case of audiophile, sessions are best to opt for a wired headset that does not introduce any kind of interference or a reduction in signal quality. However, current wireless models have improved a lot and if you do not live in intron with a lot of interference (eg routers, audio systems, other headsets, mobile phones and laptops, etc.), generally you should not notice much difference .
Okay, but after this roll I’m still undecided, could not you recommend any particular model with which to enjoy my music at the highest level? Sure, here are five headphones that will not disappoint:
Beautifully built, elegant, comfortable, easy to use and lightweight. The Shure SRH1840 with open pavilion design offer a very high-quality sound with great definition throughout the frequency range, midrange and treble crisp, crystal clear, without strange saturations and with controlled bass without reverberations.
Allow a magnificent dynamic range thanks to its 40 mm transducers. and great audio quality at all levels of volume with a naturally balanced sound. The frequency response is very close to the flat ideal that is sought in the hi-fi.
|Sensitivity:||96 dB SPL / mW|
|Frequency range:||10 Hz – 30 kHz|
|Net weight (without cable):||268 grams|
|Price:||499 $ on Amazon|
Well built and with a very high sound quality, offer a great punch in the bass frequencies while a detailed midrange and treble and crystalline thanks to its 40mm transducers. The voices are full of nuances and micro information, and timbre of complex instruments like the piano or the violin is very reliable.
They are “the last word” in regard to the size and accuracy of the soundstage, but still comfortably meet also in this section. And also they offer an interesting autonomy reaches 17 hours.
|Bowers & Wilkins P5 Wireless|
|Frequency response:||10 Hz to 20 kHz|
|Bluetooth codecs:||AAC, SBC and aptX|
With a diaphragm neodymium 40 mm. these headphones from Sony are maybe a step below the previously mentioned models, although the inclusion of a DAC good quality make them ideal for playing music from portable and mobile equipment.
It provides intense deep bass and treble with a sensitivity of 102dB / mW and multiple connectivity options for your smartphone or tablet with a battery of up to 8 hours of battery life. If you are looking for mobility in your headphones Sony HiFi, this model is a great option.
|Frequency range:||4-40000 Hz|
|Price:||300 euros on Amazon|
Despite having a price well below that of previous models, the Sennheiser HD 558 incorporates many of the best technology branded as the Duofol diaphragms , which minimize unwanted resonances, or EAR technology and making detailed sound clear
Offer impactful bass, clear treble and realistic media, especially if you like music styles in which the voice is imposed, as the vocal jazz or pop.
|Sennheiser HD 558|
|Frequency response:||15 Hz to 28 kHz|
|Price||108.98$ on Amazon|
Their high sensitivity and relatively low impedance allow us to connect seamlessly power the smartphone, tablet or multimedia player, all without losing bass and a range of acute and very balanced media.
|Frequency range:||18 Hz – 19 kHz|
|Configuration:||2-way system with passive crossover|
|Sensitivity:||119 dB / mW|
|Cable length:||162 cm|
|Price||489$ on Amazon|